> Having ascertained https://discuss.kde.org/t/how-to-capture-a-screenshot-in-plasma-mobile/15070/2?u=rokejulianlockhart, I'd like to be able to transfer screenshots off my Plasma Mobile device. > > 1. I try to access it via KDE Plasma 6's Disks & Devices plasmoid (widget): > > > !Screenshot_20240505_041647|460x450 > > 1. However, all I see is: > > > !Screenshot_20240505_041605|689x170 > > Weirdly, it's acting like https://bugs.kde.org/show_bug.cgi?id=486594#c0.

I ask because I'd like to upload screenshots to https://bugzilla.mozilla.org/show_bug.cgi?id=1895116#c1, and ascertain whether it affects https://gitlab.com/postmarketOS/webflash/-/issues/2#note_1892953259.

cross-posted from: https://monero.town/post/2936546

> While our XMR.ID stagenet test is about to conclude, I've taken the time to polish and publish another piece from my Sxmo collection - a set of tools that should help simplify your everyday Monero use on desktop, terminal and mobile. > > It's called units and is intended to be used as your main calculator and friendly companion for quick XMR rate-conversions. > > Details: https://xmr.zone/sxmo-onfire/units/ > > Feel free to report any issues. > > --- > PS: The first piece of the collection is codes, a means of monitoring gift card spending and balances. It was published in September and announced on XMR.ID's Matrix. >

Hi folks! Yesterday, I joined the club and installed PostmarketOS+phosh on my "new" OnePlus6. Besides a usb-c (power only) cable that cost me an hour to troubleshoot, everything went smoothly.

Well, nearly everything. What I cant figure out at this point is how to install and get software. I'm on the latest stable release which might have been a mistake but I'm usually quite cautious at first.

So my problem is pmos came with 16 apps preinstalled and the software app only shows these when I open it. Can someone confirm or deny if this is normal? I asked around in 5 different places for stuff in the last 16 hrs (yes, I did sleep in between) and I know a lot of stuff now but this I could not figure out. :D

I know I can install flatpak, which I did but it never shows any results at all which I find unrealistic. I put in the repo like it is shown in the wiki and I have internet. Something else must be wrong.

I'm an admin by trade and I do some software development as a hobby so feel free to assume I know how to use the command line. I'm only a full time linux user for maybe half a year.

Anybody got ideas what might be wrong?

I tried to update my Pinephone CE using "sudo apk upgrade -a" and received the error

"Not continuing due to stale/unavailable repositories. Use --force-missing-repositories to continue"

I am on 23.12 with Phosh. I remember hearing that the Pinephone may be getting dropped from main to community so I wasn't sure if this was related to that or something different. Is it safe to use the command it suggests ? I figured I would ask before blindly doing it.

cross-posted from: https://hexbear.net/post/2029720

> I was thinking of getting one of these as a cheap replacement for my broken (and disappointing) Pinephone Pro. > > What's the experience like?

Edit 2/2/24: So, earlier today, I got the idea to use lvm. I've only used it once in a TUI install, so I had to learn how CLI tools today. I was pleased to see volume group and changes made to the logical volume persisted after a reboot.

While trying to learn how to configure the initramfs to boot pmOS from a logical volume, I discovered a gitlab thread from 2017 discussing using system and userdata as a logical volume: https://gitlab.com/postmarketOS/pmbootstrap/-/issues/60

So, I'm gonna continue investigating that. Still curious as to what's preventing the partition layout from being altered. Maybe I'll figure that out along the way.

-------------------------------

https://wiki.postmarketos.org/wiki/Motorola_Moto_G_2015_(motorola-osprey)

This phone only has 8GB of internal storage. I've attempted to remove the system and userdata partitions and create a larger unified partition in their place. I have no desire to ever run Android on it again, so I'm willing to risk bricking it. No matter what I do, those partitions are restored after a reboot.

I've tried directly doing so via parted in pmOS running from an SD.

On my PC, I've tried cloning the internal storage, making the partitions accessible via losetup and partprobe, editing them via parted, and piping the edited clone via dd using ssh in pmOS and adb in TWRP.

Afterward, I'd use partprope and run 'ls /dev/(block/)mmcblk0*', lsblk, and 'parted /dev/(block)/mmcblk0 p' to verify that the desired partitions are in place. Only in pmOS, though. TWRP gives a device busy error when using partprobe.

I've tried using using fastboot's delete-logical-partition option, but that failed with an error telling me to run 'fastboot oem help', which lists no commands to delete partitions. I realized today the aforementioned would apparently only work on devices using Android dynamic partitions.

In pmOS, I see no output in dmesg when editing partitions. I have no idea what to search for online and keep getting irrelevant or no results. Does anyone know what is occurring here or what I should be looking out for?

I would like to incentivize timely (1-2 months max.) implementation of pmOS camera-support for SDM845 devices by offering a bounty of 6 XMR (Monero, the digital cash). The intent to win the bounty has to be discussed here beforehand.

If supporting the entire list of devices implies significantly more effort than a subset, the minimum should be OnePlus and Shift. Details from comment:

> When one opens a camera application (like millipixels), the screen should show what the camera points at and capturing color photo and video of that content should be possible. It should run in a stable manner (meaning no anticipated crashes) and the required changes should be accepted into the postmarketOS edge branch.

If bounties happen to be against the ethos of the project, let me know.

On the contrary, I hereby invite others to chip in.

Comment if interested.

>We currently have a generic port for Nvidia Tegra 2/3/4 devices using U-Boot as bootloader, supporting 9 different devices at the time of writing. This wouldn't have been possible without the work of Svyatoslav Ryhel (also known as Clamor), who has been working on Tegra devices for the last few years and is also a maintainer of Nvidia Tegra SoCs in U-Boot. > >The wiki page has a list of supported devices. > >Svyatoslav ported most of these devices without owning one, just relying on testing from people. This means anyone having such a device can reach him and eventually will be able to replace the old proprietary vendor bootloader with U-Boot.

Today I checked the pmos sub and was quite surprised it was closed. And for what reason? API change is ancient history.

Clearly, the protest amounted to nothing and frankly once I figured out that reddit api change wasn't about preventing foss apps, but about squeezing paid apps out of the market, I didn't care about it at all.

What's important for any project is the community, and reddit is simply the only place where such community can grow. So why not open it back up?

I'm using postmarketOS plasma edge on my Pinephone Pro. The KDE program Kasts (installed from a postmarketOS package) crashed when I tried to run it, so I filed a bug report with them. They suggested that I file this bug directly with postmarketOS. The rationale was:

>These kinds of faults tend to happen when a library that Kasts depends on gets updated without Kasts itself getting recompiled. Then you can end up with an instruction that has changed in the underlying lib without Kasts knowing about this, leading to a crash. So, I would think it's simply a matter of recompiling the package.

I'm not sure where the correct place is to file a bug with postmarketOS. If there is another place where I should do so, then do let me know in the comments below. Thanks.

A bunch of characters seem to be missing making text unreadable. What could the problem be? !

I want to install PostmarketOS on my Xiaomi Mi 9t but, as it say on the wiki page, it's not in the repositories, so I can't just select it in pmbootstrap. How do I install it then?

I ran updates this morning on my PinePhone running PostmarketOS and it seems the phone can no longer suspend correctly. Once a minute or so the screen flashes to the lock screen with the message "automatic suspend" and then goes black again, but doesn't seem to actually suspend. The blue notification light keeps blinking. This means the battery drains faster. Anyone else experiencing this? Any ideas what is going on? Booting doesn't solve the issue. I'm using Phosh.

EDIT: More information and a workaround at: https://gitlab.com/postmarketOS/pmaports/-/issues/2185

Is Alpine also becoming immutable, or is this development towards immutable independent/separate from Alpine?

I'm not involved in the project by any means. Not even an user yet. Just a fanboy. Thanks for everybody involved in this project.

I would love to use PostmarketOS as my daily driver but my Pinephone CE isn't really giving me the battery life I need to make it happen. I am looking at what phones I can get my hands on in Canada that would be better suited. So far the OnePlus 6T seems to be my best option. I can't get the Shift6mq or the Poco F1 shipped here. Any suggestions if battery life is my main need ? I take my phone off the charger at 11am and don't get home until close to midnight with no way to charge while at work.

Hi, I just installed postmarketos on my OnePlus 6 and after an update of the packages (or install a new one), I get "no space left" errors. I followed the guide and flashed the partition like it's written in it. Any reason that can cause this ?

OnePlus 6 with 128gb, using the prebuilt sxmo (sway) edge image.

cross-posted from: https://lemmy.ndlug.org/post/8065

> > Alice "psykose" who is easily responsible for the highest number of commits per author over the past year has decided to step down from maintaining her packages. > > > She hasn't decided what to do next but likely "catch up on a year of sleep." She doesn't believe that this will ultimately impact Alpine Linux itself but hopes that others will pick-up what's needed to keep on going with the package maintenance.

Obviously things can change over time but does anybody know if there is currently any planned support for the RISC-V version of the PineTab 2 for PostmarketOS ? Would a RISC-V device even work with PostmarketOS ?

Hi all,

I am using a few old oneplus phones with pmos as a cheap homelab.

The thing is that they are permanently connected and I would like to limit the charge to something like 40% to prevent battery from swolling but I couldn't find how to do it.

Any ideas?

Hello,

I got a problem with my installation of PostmarketOS on a Fairphone 2

The problem

When the phone boot, after the PostmarketOS logo, I got a TTY instead of phosh or gnome.

I have no UART or network access to the phone, so I try to copy the error message I can see with a magnifying glass:

``` msm_mdp fd900100.display-controller: [drm:adreno_request_fw] loaded qcom/a330_pm4.fw from new location msm_mdp fd900100.display-controller: [drm:adreno_request_fw] loaded qcom/a330_pfp.fw from new location input: ILI210x Touchscreen as /devices/plateform/soc/f9924000.i2c… [drm:mdp5_irq_error_handler] ERROR errors: 04000000 Console: switching to colour frame buffer device 135x120 msm_mdp fd900100.display-controller: [drm] fb0: msmdrmfb frame buffer device

```

And then, I got an invite to log on TTY1

The installation

I use pmbootstrap. On the init, I choose this configuration:

Canal: Edge Vendor: Fairphone Device: fp2 Kernel: mainline User interface: Phosh All other options: The default

I flashed by following the wiki page: https://wiki.postmarketos.org/wiki/Fairphone_2_(fairphone-fp2)

Great video showing how Gnome Shell on Mobile looks like in postmarketOS v23.06 on the PinePhone, including a segment with convergence mode. Found it in the latest linmob.net weekly post.