Supplier Caught Distributing Fake Parts for World’s Top-Selling Jet Engine

This is a sign that there are extremely right safety standards and lots of oversight. The amount of documentation needed for all aerospace parts means it is quite difficult to falsify records for long without getting caught. The fact that any of these types of event are big news and often result in arrests should help you be confident that the standards are real and enforced. There will always be bad actors, and finding them like this is part of reality. Just look at the safety record of commercial aviation to see proof that the system is working.

Permanently Deleted

I mean, did everyone suddenly forgot about everything that happened with the 737 Max?

Both the FAA and Boeing should be ashamed.

Finished parts are much harder to verify without damaging them or the finish. We do get training on identifying counterfeits, though.

Planes are still highly over-engineered.

Well, the standards are still there, but if people don't adhere to them, profits happen, so they gladly take some ... mishaps into their calculation.

People are always saying "I don't know about Bizzle, that dude won't fly." If I can't drive there, I won't go. You really should consider it, there are a lot of really cool things that you will only ever find out about when you drive past it on a state highway. It somewhat limits my destinations, but North America is a big place that I've yet to see all of so I don't mind so much.

Could be worse... AIG

what do they call a med student who graduates bottom of their class?

a doctor.

And not the first time that happened.

Not sure how one company based in London doing something wrong makes all Brits "the worst people" but alright

I'm going to start off with saying I am a certificated aircraft mechanic, and I've been exercising my privileges as such for several years on both passenger and cargo aircraft for several airframes.

This situation is actually a VERY big deal and it is going to be VERY expensive and time consuming to fix.

When a part is sold or repaired by a manufacturer, it comes with an airworthiness certificate. In the US, this is FAA form 8130-3. It not only certifies that the part conforms to specifications; but it shows who certified it, who tested it, what specs it meets, and the history of the part. Both the airline purchasing the part and the mechanic installing the part need this document to legally repair the aircraft.

There could be a variety of problems with receiving fake parts that slip by SUP inspections (Suspected Unapproved Parts), and these are both legal and safety problems. A fake serial number means you don't know the true history of the part. It could have been pulled from an abandoned aircraft from a third world country, and even though it passed a bench test, it could be a ticking time bomb. It could be a part in exceedence of service hours, but the paperwork that came with it says it's freshly overhauled.

It could just plain not meet specifications. Premature failure is a big deal. Especially when the list of things that can be broken on a plane (MEL / Missing Equipment List) and still be safe for flight depend on a rated level of reliability. As an example, an aircraft can operate with a certain number of brakes not working for a limited period of time (such as up to two inoperative, no more than one per pair, for no longer than 10 days or 10 flight cycles). This assumes that all of your other brakes aren't going to prematurely, simultaneously fail before that time limit is up.

This article specified that these are engine parts, which adds a whole other level of risk to flight safety. The CFM56 from this article can be rated for ETOPS 180, which stands for Extended Operations up to 180 minutes. Normally, twin-engine aircraft are required to remain with 60 minutes of a suitable airport in the event of an emergency. This often limits what routes certain aircraft can take. ETOPS allows certain aircraft to go farther than the 60-minute rule (in this case, up to 180 minutes), which is a huge deal in terms of flight time, efficiency, and simply whether or not they can fly internationally. To maintain ETOPS rating, the aircraft has to meet stricter specifications. These can range anywhere from parts with tighter tolerances, to things like larger oxygen and fire-extinguishing bottles. They also need to be able to start their APU in flight for a source of electricity in the event they lose an engine.

The airline is also limited on the number of in-flight shutdowns they can have. This number is intentionally very low. If the airline as a whole exceeds this number, their fleet-wide ETOPS rating will be revoked.

Parts have to be specifically rated for ETOPS to be installed on an aircraft flying ETOPS routes. Bad parts make this a huge risk. An in-flight shutdown is a very dangerous situation, and bad parts dramatically increase the risk of that becoming a dual engine failure while that plane spends 3 hrs diverting to the closest airport.

Going forward, there is no good way to check if the parts sold actually meet specs until they're disassembled and checked. Directives from the FAA will be issued. Inspections will be performed. Airplanes will be grounded and rectified. The manufacturer might be able to provide a list of parts that need to be recalled, but more than likely EVERY part they issued will be pulled. They may also have their repair station and manufacturing certificate from GE revoked. Even if they don't lose their certification, most of the airlines will avoid them now.

To address the points you made in your comment, lefixxx, false documents mean bad parts. These parts absolutely DO pose a safety risk. They very likely ARE out of spec, timed out, or simply not rated for what the papers say. Even if the part is tested and meets specs, the history of that part is lost. It will need to be overhauled and made "new" again in order to be airworthy.
All of the regulations and strict document control requirements we follow have all been written in blood. People HAVE died because of things like this in the past, and it's our mission to keep it from ever happening again.

Edit:
Here's an excellent article detailing Partnair Flight 394, and the aftermath wherein they discovered a plethora of counterfeit parts not only on the airplane, but also across the industry at the time: https://admiralcloudberg.medium.com/riven-by-deceit-the-crash-of-partnair-flight-394-f8a752f663f8

I don’t think you quite understand the level of rigor that these components are manufactured with. If the documents are not provided, or if they’re counterfeited, the parts are assumed to be out of spec. The precision required for these things, as well as the integrity analysis done after they’re completed, are absolutely critical, and can make the difference between 1000 and 10000 hours MTBF on something like a compressor stage.

Individual parts could be not a safety risk.

But it is inevitable that if they’re not testing parts, ornwhatever, that parts not meeting standards will come into use.

Which means you’re wrong about this only potentially being a safety risk. It IS a safety risk. Period.

They’re intentionally falsifying documents to save a buck. They should be fucked out of business and the idiots who thought it was a good idea thrown in jail. (That would likely be the Execs.)

There is no reason to fake the certification documents unless you're not following the required standards.

Why would a manufacturer go through all the effort and expense to make parts at the required standards, with hugely expensive manufacturing, only to take on a huge risk to save a negligible amount on the paperwork? That is a horrible business decision.

these COULD pose a huge safety risk. Until the parts are tested it is unclear if they are actually bad.
this is a badly written article

The article is correct. The safety risk is that the parts COULD be dangerous to use. Whether the parts are actually defective or not is irrelevant because they don’t know; that’s what makes them a risk.

Yes these COULD pose a safety risk, until they are tested it's unclear they are actually GOOD.

FTFY.

Air travel is one of the safest modes of transportation because we have these measures in place and take them seriously.

If any of the paperwork is missing or falsified the part is scrap. When we buy material it comes with certified reports on the alloy's component elements.

Inconel is often used around engines for heat resistance. If it has too much of an element that changes at what temperature it becomes ductile you could lose some very important components or systems.

Steel doped with sulfur raises its embrittlement temperature.

They'll be tested to sort out the urgency of the corrective action, but those parts are scrap. Also, someone might be going to prison.

Is it insane to play Russian roulette? There's a good chance nothing will happen if you pull that trigger, right?

By definition, risk means there is no guarantee of a specific outcome. There is no risk of falling if you jump off a cliff (without special aids) - you just fall. Smoking increases your risk of cancer. Bob Hope lived to 100, apparently cancer-free, while smoking. Neither of these statements are untrue, he just didn't suffer the results those risks indicated. While that's good for him, it's not the attitude I want taken with aircraft parts.

Damn. Falsification of documentation means you can't run as much as a McDonald's where I'm from.

Most metal parts testing is destructive. I.e., once you test the parts, they are destroyed and you can't use them anymore. That's why the trust I certificates is so important. They certify that metal from the same batch passed those tests. That's why it's a huge safety risk if the certs are fake, there's no guarantee that the metal can meet the requirements, and no way to test without breaking the parts.