Here is my current homelab setup (now show me yours)
Here is my current homelab setup (now show me yours)
I wish lemmy would allow for bigger images.
My setup:
-
VPS: Wireguard and ngnix proxy
-
Nanopi: Friendlywrt for the firewall
-
Dell precision tower 3620: proxmox with lxc containers running caddy and WordPress. I also have a VM running docker which runs some services, truenas for storage and a Linux mint VM for gaming, machine learning and jellyfin in podman. The machine has a 590 and a standard power supply. I had to cut off some of the housing in the case and on the GPU to make it fit.
-
Beelink mini PC: It also runs proxmox and has my VM endpoint for wireguard with another ngnix proxy. It also runs a VM with docker for some other services
-
Raspberry pi 3: i2p for fun
How it started.
How it's going.
Note: The last Pic is when I installed my 10gb switch, but I was still waiting for my DAC cables to arrive. All my servers are using 10gb at this point. Also, I should note that the cable management isn't great... I'm in the process of moving to mikrotik switches. So I have a few misc cables that are out of place currently as I'm migrating/testing things.
This is my homelab.
Hades Canyon NUC
I7 Intel NUC
Some ubiquiti gear and raspberries.
Nice, thanks for sharing! Mine looks like this atm:
- HS: Mainly Docker containers and VMs
- VPS: Wireguard to relay traffic (NAT) to the HS (SSL termination on HS)
- UPS in case of power outage
- Pi4 for backups within the local network. It also has a disk station for regular air gapped backup.
- Pi3 for off site backup
- Fire extinguisher nearby in case of emergency ^^
Here is a photo of the inside of the case:
Permanently Deleted
Y'all have fancy labs.
All I have is a HP dl380 Gen8 sitting sideways between my desk and my wife's desk. Its use is now eveng for ccnp studies.
Same! (Although mine might be a G7, forget). What specs are you running in there? Mine has become grossly underpowered for basically anything compared to the electricity it uses, so I haven't turned it on in ages.
2x Xeon E5-2650 8x 16Gb ram (128 total) 2x 600GB 10K SAS
Thinking of upping the CPU and getting more drives though.
My wife calls it the noise machine for obvious reasons during booting.
Nice setup - I’ve been at eying the nanopi r4s for a while to use as fw.
I like it. I’m currently working with a GL.iNet GL-MT300N-V2.
I just got one of these for my MIL - what great little devices, aren't they? So well thought-out! I (unexpectedly) like it so much, I may get a couple more for travelling.
VPN and QoS out of the box have been nice. Haven’t spent much time on it but couldn’t figure out prioritization. (eg use Hotel Wifi and fail over to USB cellphone - but I also think channel bonding was more what I was after.)
I’m currently eyeballing a mini PC to run Speedify on to get a more redundant connection and have that connected to the router.
I would also like 5ghz as I sometimes like to Steam connect to my PC. But I can probably live without it.
Now THIS is more my style of cable management
Current setup:
2TB Apple Time Capsule
48 port PoE Cicso Catalyst switch
Unifi US8-60W switch
Unifi USG
QNAP 6-bay NAS with 4x 2TB and 2x 4TB WD Gold drives
AT&T ONT and residential gateway boxOnly the one on the top is in use, and as of right now I only have one of the bottom two (gave the other away to a co-worker. If anyone on here is in the Cleveland Ohio area and could use a Cisco UCS C220 M3 for their homelab, reach out.
Unit in use is a Cisco C220 M5SX with 2x Xeon Gold 6132 (56 total threads) and 768GB RAM, 4x 1.2TB SAS drives.
Nice setup! Someday I will end up with a UDM-Pro...someday.