and it's free

This is very uncommon in the US. Most major banks (I'm not aware of any exceptions) charge a fee for each outgoing wire transfer, usually $25-$30. Bank of America, Wells Fargo, Chase, and PNC for just a few examples I'm aware of, plus every credit union that has local branches in my area. Some of those banks even add a second fee at the recipient's side for incoming wire transfer.

They often encourage customers to rely on third party services like Zelle instead for small transfers to friends and family. Many banks' sites/apps can also handle transfers between two accounts that both belong to the same bank for free too.

Even their earliest "uncarrier" features weren't without issue. Making certain services (spotify, apple music, youtube, netflix, etc.) not count against subscribers' data caps, while continuing to enforce data caps for other uses, goes against the spirit of net neutrality. This also includes throttling video streams by default to force lower quality (with opt-out on their site).

Promos like a free pizza on Tuesdays seems like a neat optional perk on the surface but their existence fundamentally mean subscription expenses on cellular network service are partially going towards things that have not even the slightest tangential connection to the service.

A standard called SystemReady exists. For the systems that actually follow its standards, you can have a single ARM OS installation image that you copy to a USB drive and can then boot through UEFI and run with no problems on an Ampere server, an NXP device, an Nvidia Jetson system, and more.

Unfortunately it's a pretty new standard, only since 2020, and Qualcomm in particular is a major holdout who hasn't been using it.

Just like x86, you still need the OS to have drivers for the particular device you're installing on, but this standard at least lets you have a unified image, and many ARM vendors have been getting better about upstreaming open-source drivers in the Linux kernel.

To the contrary, I would expect the sample to skew more towards people who have a heavily customized X session and strong opinions about window managers while drastically underrepresenting average GNOME users who stick with the default Wayland session. Someone who likes their custom setup can still be waiting for a Wayland equivalent while casual Ubuntu users have been defaulted to Wayland on new non-nvidia installs since early 2021.

It is a Linux machine. Runs a Debian derivative, and it's not like Windows or anything else that isn't Linux/BSD can run on a RISC-V laptop.

This isn't the first RISC-V laptop, but the significance of a RISC-V laptop existing is primarily for developers who work on software targeting RISC-V systems. The ability to run RV64 programs without emulation and to natively compile RV64 software without cross-compilers is valuable to some people. Also, China in particular sees value in having computing products that aren't affected by sanctions; the processor in this is designed and manufactured by a Chinese company without licensing any intellectual property from US or UK.

I tried to do this a while ago with a GNOME system, setting GDM to automatically log me in, but I ended up always getting prompted for my password from gnome-keyring shortly after logging in which seemed to defeat the point. If you use GNOME, you might want to look at ArchWiki's gnome-keyring page which describes a couple solutions to this problem (under the PAM section) which should be applicable on any systemd distro.

There actually is a silent and very subtle revision they made to the dpad less than a year after Switch launched (iirc around the time of the Xenoblade 2 controller). The protrusion out the middle of the underside was made slightly longer, which makes you less able to push down all four directions at the same time. The chance of undesired diagonals is very high either way but just slightly lower for the newer one.

Even the improved version is one of Nintendo's worst dpads ever (including handhelds) imo, with only the GameCube's coming remotely close. A huge step back from Wii U Pro's dpad.

In 2014, MS-DOS 1.25 and 2.0 were released under a Microsoft shared-source license (Microsoft Research License) which forbids redistribution

In 2018, both versions were published to GitHub and relicensed as MIT, making them properly open-source

Today, MS-DOS 4.00 was added to that repo, also under MIT.

A ground-up overhaul of the copyright system would make things so much worse, not better, considering the current climate of power. In the US for example, MPA, RIAA, Entertainment Software Association, Association of American Publishers, and others wouldn't want public libraries or the used market to exist at all; they would push for making every single transfer of "ownership" on any media involve a payment to the rights holder. Lawmakers are far more likely to accommodate those groups' desires than the public good.

The worst parts of the current copyright system are the most recent. Both the DMCA and the extension of US copyright term to 95 years took effect in 1998, and the early 2000s saw many other countries passing laws to make their copyright system closer to US's in various ways such as the WIPO Copyright Treaty which took effect in 2002 and EU's 2006 Copyright Directive. Just about the only positive news we've seen in US copyright law since then is in temporary exemptions to DMCA's anti-circumvention rules (Section 1201) which change every year. Copyright law was far less hostile to consumers and the public before the 90s than it is now, and up until 1976 it used to be expected that most media someone consumes would enter public domain within their lifetime.

The digital era makes market relevance far more ephemeral than ever and yet the laws written for the digital era moved copyright in the opposite direction. Movie studios simultaneously judge whether a film succeeded almost exclusively based on its first week of ticket sales and also claim that depriving public domain for 95 years is necessary. Nothing should be able to justify more than 20 years of copyright. Media formats don't even last as long as copyright; CDs and DVDs rot, game cartridges die, servers shut down, and even books printed on today's low-quality paper will fall apart.

Some of it is absurd to me, like the way something can be online but geographically restricted.

This is a consequence of contract terms moreso than copyright. One issue in copyright law that this does connect to, though, is the fact that the question of whether the rightsholder keeps a work reasonably available on the market does not impact whether the work retains copyright protections. If copyright law did hypothetically include that limitation, providers would become far more likely to make sure that all content is available in all countries, but even then things could still vary in terms of which content is on which platform.

For years I've been using KeepassXC on desktop and Keepass2Android on mobile. Rather than sync the kdbx file between my devices, I have each device access it through the network. Either via sftp, smb, or nfs, but regardless I need to connect to my home's VPN to access it when away from home since I don't directly expose those things to the outside world.

I used to also keep a second copy of the website-tied passwords in Firefox Sync, but recently tried migrating that to Proton Pass because I thought the PIN feature might help, then ultimately decided to move away from that too and start using the KeepassXC-Browser plugin instead. I considered Bitwarden too but haven't tried it out yet, was somewhat deterred by seeing people say its UI seems very outdated.

There's only one case I've found where Wi-Fi use seems acceptable in IoT: ESPHome. It's open-source firmware for microcontrollers that makes DIY IoT sensors and controls accessible over LAN without phoning home to whatever remote server, without trying to make anything accessible over the Internet, and without breaking in any way if the device has no route to the Internet.

I still wouldn't call Wi-Fi use ideal even there; mesh can help in larger homes and Z-Wave/Zigbee radios tend to be more power efficient, though ESP32 isn't exactly suited for a battery-powered device that's expected to run 24/7 regardless.

That's strange. As far as I can tell from any web searches, every version Windows still defaults to storing local time to the hardware clock and there are no reports of that changing with an update, nor is there any exposed setting control to configure this behavior outside of regedit. If you're curious enough, you can check the current setting in the registry at HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\TimeZoneInformation. Windows maintains the current time as UTC if and only if the RealTimeIsUniversal key is present and nonzero.

I expect it's more likely some other issue would make the BIOS display an hour that's inconsistent with your local timezone. For example, maybe a bug in the BIOS, maybe a timezone offset setting within the BIOS, or maybe a dead clock battery.

Unix time is far less universal in computing than you might hope. A few exceptions I'm aware of:

• Most real-time clock hardware stores datetime as separate binary-coded decimal fields representing months, days, hours, minutes, and seconds as one byte each, and often the year too (resulting in a year 2100 limit).
• Python's datetime, WIN32's SYSTEMTIME, Java's LocalDateTime, and MySQL's DATETIME similarly have separate attributes for year, month, day, etc.
• NTFS stores a 64-bit number representing time elapsed since the year 1601 in 100-nanosecond resolution for things like file creation time.
• NTP uses an epoch of midnight 1900-01-01 with unsigned seconds elapsed and an unusual base-2 fractional part
• GPS uses an epoch of midnight 1980-01-06 with a week number and time within the week as separate values.

Converting between time formats is a common source of bugs and each one will overflow in different ways. A time value might overflow in the year 2036, 2038, 2070, 2100, 2156, or 9999.

Also, Unix time is often managed with a separate nanoseconds component for increased resolution. Like in C struct timespec, modern *nix filesystems like ext4/xfs/btrfs/zfs, etc.

as soon as the BIOS loaded and showed the time, it was "wrong" because it was in UTC

Because you don't use Windows. Windows by default stores local time, not UTC, to the RTC. This behavior can be overriden with a registry tweak. Some Linux distro installer disks (at least Ubuntu and Fedora, maybe others) will try to detect if your system has an existing Windows install and mimicks this behavior if one exists (equivalent to timedatectl set-local-rtc 1) and otherwise defaults to storing UTC, which is the more sane choice.

Storing localtime on a computer that has more than one bootable OS becomes a particularly noticable problem in regions that observe DST, because each OS will try to change the RTC by one hour on its first boot after the time change.

Yes.

My home server has dropbear-initramfs installed so that after reboot I can access the LUKS decryption prompt over SSH. The one LUKS partition contains a btrfs filesystem with both rootfs and home as subvolumes. For all the other drives attached to that system, I use ZFS native encryption with a dataset that decrypts with a keyfile from that rootfs and I have backups of an encrypted copy of that keyfile.

I don't think there's a substantial performance impact but I've never bothered benchmarking.

I had assumed their reasoning for not taking that approach might be related to metadata at rest, but it seems they don't use "zero access" encryption for metadata even at rest so I have no idea what technical justification they could have for not supporting IMAP with PGP handled by the email client. The fact that they restrict bridge access to paying subscribers only doesn't help them avoid lock-in impressions either.

I’m not sure if this is required. Any decent e-mail server uses TLS to communicate these days, so everything in transit is already encrypted.

In transit, yes, but not end-to-end.

One feature that Proton advertises: when you send an email from one Proton mail account to another Proton address, the message is automatically encrypted such that (assuming you trust their client-side code for webmail/bridge) Proton's servers never have access to the message contents for even a moment. When incoming mail hits Proton's SMTP server, Proton technically could (but claims not to) log the unencrypted message contents before encrypting it with the recipient's public key and storing it. That undermines Proton's promise of Proton not having access to your emails. If both parties involved in an email conversation agree to use PGP encryption then they could avoid that risk, and no mail server on either end would have access to anything more than metadata and the initial exchange of public keys, but most humans won't bother doing that key exchange and almost no automated mailers would.

Some standard way of automatically asking a mail server "Does user@proton.me have a PGP public key?" would help on this front as long as the server doesn't reject senders who ignore this feature and send SMTP/TLS as normal without PGP. This still requires trusting that the server doesn't give an incorrect public key but any suspicious behavior on this front would be very noticeable in a way that server-side logging would not be. Users who deem that unacceptable can still use a separate set of PGP keys.

They say the reason for needing their bridge is the encryption at rest, but I feel like the better way to handle wanting to push email privacy forward would be to publish (or better yet coordinate with other groups on drafting) a public standard that both clients and competing email servers could adopt for an email syncing protocol for that sort of zero-access encryption that requires users give their client a key file. A bridge would be easier to swallow as a fallback option until there's wider client support rather than as the only way.

A similar standard for server-to-server communication, like for automatic pgp key negotiation, would be nice too.

Still, Proton has a easy to access data export that doesn't require a bridge client or subscription or anything. I think that's required by GDPR. It's manual enough to not be an effective way to keep up-to-date backups in case you ever abruptly lose access but it's good enough to handle wanting to migrate to another provider.

Compared to simplelogin (or proton pass aliases, addy, firefox relay, etc), one other downside of a catchall is in associations across accounts. Registering with a @passmail.net address implies that I use Proton; registering with random-string@mydomain.org implies I have access to that domain. If 10 data breach leaks have exactly one account matching the latter pattern then that's a strong sign the domain isn't shared. If one breached site has my mailing address, my real identity can be tied to all the others.

Thanks for the recommendation. I'll give it a try sometime.