Skip Navigation
Ts10 red aux?
  • @Schlemmy @Lurkinney Isn't there an option to disable the voltage flashing? I recall something like that.

  • 3000 K BraTS10 and 4500 K DD MT21C lighting up the inside of a van while loading up the theater set and equipment.
  • @flashlight for those asking why I'm not on the pictures, working with the others, I was going back and forth from the stage with equipment, because the stage and backstage are 1,10m above the floor, and van, with no elevator or stairs nearby :D

  • 3000 K BraTS10 and 4500 K DD MT21C lighting up the inside of a van while loading up the theater set and equipment.

    3000 K BraTS10 and 4500 K DD MT21C lighting up the inside of a van while loading up the theater set and equipment. The van was otherwise not lit at all on the inside. @flashlight #flashlight #theater

    1
    [Recommendation Request] What's a good entry level right angle flashlight?
  • @cobysev @GraniteM I have a french version from 1942 and modded it with a pretty low power, 2700~3000 K single LED drop-in, and more importantly a 18650 battery with integrated USB charging. I built a cheap 2D-18650 adapter by hollowing a piece of wood from the bottom and putting a flat-cut screw through the top to make contact. My grandpa use it and is happy with it. Way more runtime, bit more light, same temp.

  • [NLD] Just arrived: Sofirn SC13 – little EDC flashlight with 18350 battery and SST-40 behind a Fresnel lens
  • @Curious_Canid I read somewhere that the last digit is the shape : 0 for cylindrical

  • I'm officially the flashlight guy of the family, according to this present 😭
  • @mp3 my little sister (21) just now: "I want that!"
    Thanks, I now have an excuse to buy them :D
    (And 519A-mod them before gifting them)

  • Je suis prêt pour le 8 décembre.
  • @flashlight Left to right: TS10 3000 K, MT21C 6500 K DC-fixed, MT21C 519A 4500 K DD DC-fixed, TS10 4000 K.
    If you click on the fedi logo you can see more pics.
    Also dec 8 in Lyon, FR, is a historical festivity all about illuminations.

  • The reactor is ramping up – Skilhunt/ESKTE MiX-7
  • @SammysHP So it's one color at once only? No ramping? Only two brightness settings for each channel, + strobe? Still a cool light!

  • Today I swapped the awful and greenish factory Cree XP-L HD V6 6500K of a Nitecore MT21C for a Nichia 519A 4500K (MCPCB swap). I may try to install a floodier TIR optic. Click the fedi logo for more!
  • @fujiwood Messy at the start! https://www.reddit.com/r/flashlight/comments/171lkvk/first_messy_try_at_modding_wip/

    Then, since I purchased the LED already soldered on a MCPCB, I desoldered the stock one, ground a bit the new one to fit, soldered the wires back on the new MCPCB and voilà. Changed the thermal paste too.

  • Today I swapped the awful and greenish factory Cree XP-L HD V6 6500K of a Nitecore MT21C for a Nichia 519A 4500K (MCPCB swap). I may try to install a floodier TIR optic. Click the fedi logo for more!

    Today I swapped the awful and greenish factory Cree XP-L HD V6 6500K of a Nitecore MT21C for a Nichia 519A 4500K (MCPCB swap). I may try to install a floodier TIR optic. Click the fedi logo for more! #Flashlight @flashlight

    6
    Two vise clamps and lots of brute force, I finally disassembled the head of a MT21C, which is a great light with shitty emitter and beam. What emitter should I swap for ? 3.45mm square, 2.79 Vf typica

    Two vise clamps and lots of brute force, I finally disassembled the head of a MT21C, which is a great light with shitty emitter and beam. What emitter should I swap for ? 3.45mm square, 2.79 Vf typical, 3 amps. I like 4000 k and high CRI. @flashlight

    4
    Problem finding flashlights for camping...
  • @Tuss I think they're shit too, the effective ones were probably banned in France too. Maybe for the better, being highly toxic things burning in close proximity to people. Non-"volatile chemical" solutions may be a better option.

  • Data is Beautiful @lemmy.world Lu 🇦🇲 @lou.lt
    [OC] Hi ! I live near Lyon, France and this is a map from only my GPS traces from the last 4 years. [#map](https://lou.lt/tags/map) [@dataisbeautiful](https://lemmy.world/c/dataisbeautiful)

    [OC] Hi ! I live near Lyon, France and this is a map from only my GPS traces from the last 4 years. #map @dataisbeautiful

    10
    Comparing the 3D beam shapes (and not a side projection on a wall) of the 1 LED + SMO Nitecore MT21C vs the 3 LED + TIR optics of Wurkkos TS10s (4000 K and 3000 K). Using soapy water in a white tub. [

    Comparing the 3D beam shapes (and not a side projection on a wall) of the 1 LED + SMO Nitecore MT21C vs the 3 LED + TIR optics of Wurkkos TS10s (4000 K and 3000 K). Using soapy water in a white tub. @flashlight #flashlight

    4
    [@flashlight](https://lemmy.world/c/flashlight) I may have overheated my brass TS10. The battery wrap shrank.

    @flashlight I may have overheated my brass TS10. The battery wrap shrank.

    I used it continuously in candle mode @ high with the original silicone diffuser for a video shoot, and found the battery looking like that, opening the light right after stepdown (and almost burning my fingers).

    11
    luppano Lu 🇦🇲 @lou.lt

    Live video director / réalisateur de direct Mais aussi régisseur du spectacle, souvent avec des jeunes. I like big moving machines, trains, nuclear stuff, electric infrastructure, measuring and plotting things (CO2 ppm charts, thermal camera, GPX traces, #OSM...). ND

    Posts 13
    Comments 33