No, because I am worried the NSA may try to collate data from them. In fact, I zero-wipe, drill bit the drives in the platters and the PCB, and drop them off at e-waste for recycling.
I used to make clocks with the platters and give them to friends and family. Michael's used to sell inexpensive clock mechanisms that looked really cool against the platter background. I haven't seen them lately, but I'm sure someone sells them online.
I will keep the magnets if I ever get into this in the future, but not the platters. I'll just safely destroy them and dispose of them.
So far I only had 3 laptops and no desktops. I had 0 HDD failures, since I only ever had 3 of them so far.
The oldest one is more than 17 years old 80GB 2.5" Fujitsu HDD.
A common public toilet till machine has a keyhole that looks like a coin slot. Turns out, HDD magnets are the perfect shape to fish out any coins mistakenly thrown in there.
I do that to my dead drives, but I’ve only had one fail that wasn’t an SSD. Moreso because the washers that separate the platters have a very satisfying ring to them that makes me keep them as a fidget toy.
I use the magnets to hold screws, it works great for that.
Unfortunately, SSDs have less interesting parts, so I just take them apart to destroy the chips after failure
The older IDE drives with the 5.25" platters and smaller ones make great wind chimes. The laptop ones are a bit .ore fragile due to thinner material. Years ago, we used to do this with a few of them.
I use old platters to hang around our chicken houses. The idea is to distract hawks and eagles with the sparkle as they spin in the breeze... Probably doesn't work, but I like the shiny disks :)
There's some really fun chemistry in the rare-earth magnets - I used to buy them in bulk to enlarge my own IT-workshop collection, which was mostly broken down for Nd salts. Also, the magnets from iMac screens were also plentiful when HDD magnets got small (and then went extinct).
Back in the day I bought a fridge freezer combo, second hand, no handles. Used to be a built in model. As handles I used two magnets from full height drives, they were ludicrously strong and shaped like a little bit like a handle.
Full height drives were 3.25" high for those who are wondering.
I used to. Magnets on old hard drives were better. Any drive I've taken apart over the last ten years or so are smaller and more brittle. Not as worth taking apart.
I don't want to ruin your fun, but the last time I saw a post like this on reddit, the top comment was: "Don't open hard drives. They contain micro particles from wear and tear, that are as dangerous as asbestos."
New Lemmy Post: Does anyone else harvest the magnets and platters from old drives as a monument to selfhosting history? (https://lemmy.world/post/11297090)
Tagging: #SelfHosted
(Replying in the OP of this thread (NOT THIS BOT!) will appear as a comment in the lemmy discussion.)