QNAP NAS Remote Access with WireGuard VPN
QNAP NAS Remote Access with WireGuard VPN
QNAP Remote Access with WireGuard VPN. GitHub Gist: instantly share code, notes, and snippets.
Yesterday I setup remote access to my QNAP NAS and wrote a guide for it, that I can reference later. Might be helpful for someone. This was my first time doing something like this. So any notes on my approach are also welcome.
Would not recommend setting the static IP on the device. A much better solution is to set up a static lease in your DHCP Server.
Thank you for the feedback. I wasn't aware of DHCP static leases. I quickly looked into it. Is the benefit that all IP addresses are assigned by the single DHCP server as opposed to having configurations scattered across individual devices? Or are there other benefits as well?
It boils all down to "centralized management".
With that the DHCP server has control over anything. Reduces (or basically eliminates) the risk of IP collisions. Also it gives you a place where you get a overview over your network. You change the DNS Server? You do it onetime in the DHCP settings. Etc. Etc.
Hopefully your DHCP server never goes down.
@Appoxo @ShortN0te On your own network you should be able to have a long enought lease that it shouldn't be a problem if your dhcp server is unavailable sometimes.
Hopefully your DHCP server never goes down.
DHCP is a curial part of every network. When it goes down then you need to respond. Leases usually are given out for several days. Even then, to fix yoy DHCP you can just use a static address temporarily.
Similar stupid statements are: Hopefully your Switch never goes down. Hopefully your Router never goes down. Hopefully your Server never goes down. Hopefully your House never burns down.
Acronyms, initialisms, abbreviations, contractions, and other phrases which expand to something larger, that I've seen in this thread:
Fewer Letters More Letters DNS Domain Name Service/System IP Internet Protocol NAS Network-Attached Storage VPN Virtual Private Network
[Thread #368 for this sub, first seen 21st Dec 2023, 16:15] [FAQ] [Full list] [Contact] [Source code]
Would be nice to be able to run WG on the NAS directly and not need a server, wouldn't it? I believe there are a few go/rust userspace WG servers out there but I don't know if anyone's using them for anything like that.
New Lemmy Post: QNAP NAS Remote Access with WireGuard VPN (https://lemmy.world/post/9824536)
Tagging: #SelfHosted(Replying in the OP of this thread (NOT THIS BOT!) will appear as a comment in the lemmy discussion.)
I am a FOSS bot. Check my README: https://github.com/db0/lemmy-tagginator/blob/main/README.md
New Lemmy Post: QNAP NAS Remote Access with WireGuard VPN (https://lemmy.world/post/9824536)
Tagging: #SelfHosted(Replying in the OP of this thread (NOT THIS BOT!) will appear as a comment in the lemmy discussion.)
I am a FOSS bot. Check my README: https://github.com/db0/lemmy-tagginator/blob/main/README.md
New Lemmy Post: QNAP NAS Remote Access with WireGuard VPN (https://lemmy.world/post/9824536)
Tagging: #SelfHosted(Replying in the OP of this thread (NOT THIS BOT!) will appear as a comment in the lemmy discussion.)
I am a FOSS bot. Check my README: https://github.com/db0/lemmy-tagginator/blob/main/README.md