Working below minimum wage to save the planet

True. It isn't always about a cost/labour analysis. Sometimes I want to repair something to learn how to do it. Sometimes I want to repair something because even though 'my time is valuable', I hate the idea of throwing out something I know will rot in the landfill for a thousand years. Sometimes I'm just attached to the thing and afraid I won't find a replacement that is as good (which is often the case).
I hate our throwaway culture, it's good to know how to fix things even if it isn't technically 'cost effective' to do so.
- All of these reasons but I also just enjoy the experience of fixing something. It feeds the soul in some deep way for me
- Karl Marx's theory of alienation describes the separation and estrangement of people from their work, their wider world, their human nature, and their selves. Alienation is a consequence of the division of labour in a capitalist society, wherein a human being's life is lived as a mechanistic part of a social class
  https://en.wikipedia.org/wiki/Marx's_theory_of_alienation
- Also, I think that you shouldn't put a price on your free time off work? You wouldn't be working anyway, why put a price tag on it?
  
  Absolutely -- I hate how we've been raised to think of time in monetary terms; I have to remind myself on days off that "No, I do not need to do anything it's my day off! I can sleep in... no need to be productive ..."
- I was living in a shithole apartment with a noisy fridge that the landlord wouldn’t fix and complaining to my therapist about it. He suggested I fix it, which was a completely alien idea to me at the time. It was a lot less complicated than I expected, I learned a lot about how it worked, and my self-confidence and perceived control over my circumstances skyrocketed.
- It challenges me, relaxes me, and I get a cool experience out of it
- Me with all my Koss headphones (looking at you KPH30i!), and everything with a depleted rechargeable battery.
- Also it's fun.

Doing stuff against planned obsolesce and throwaway culture are much more meaningful than recycling.
If you are a hobbyist, you can break them in to components and build something new. Preferably something that doesn't burn your house down or electrocute someone. Stay under 50V.

Repair > replace.
It's not just about how much money it costs.
- Less waste thrown into a dump, gain knowledge of how to fix the issue, can help others with fixing the same issue, and sends the message that we'd rather repair than replace.

It’s not about the money - it’s about sending a message

Hell yeah brother.
I legit contracted with an OEM over Alibaba to make a custom piece of glass to adhere to the new LCD screen to replace the broken screen in my wife’s Playdate.
Though in that case it was like $150 total.
- Damn, sounds impressive! The experience that inspired this meme for me was swapping the buttons in my mouse for newer ones from a dead donor mouse, which admittedly took much less than 2 hours haha
  
  Imagine the reduction in e-waste if everyone in high school took a short course in how to use a soldering iron, solder-sucker/braid and heat-gun to replace common bits in consumer electronics. So many things could be saved that get thrown out only due to a bad microswitch or cracked solder joint to a USB or headphone connector ...
  
  That’s so great. You should be proud.

When you can't earn money, then, time isn't money, Money IS Money! Sure that device costs $5 to replace, but with those two hours that you weren't earning cash, you saved $5 that you can spend on whatever your heart desires. When you aren't earning, save.
- You can be making money anytime nowadays if you've got a driver's license. Not that I'd recommend it though.
  
  Don't most of those jobs require you to supply your own vehicle, fuel and other vehicle-related expenses?
- And also the tax/pension/health/VAT deductions from money earned is x% for varying scary values of x, but the equivalent from money "avoided" AKA "money you didn't need to earn because you didn't need to spend it because you fixed stuff yourself" is 0%. That is the reason DIY, Right-To-Repair, barter systems, etc are all demonised institutionally. They are wedge-issues which run counter to the fostered futility-narrative that keeps the wage-slaves quietly running on their mouse-wheels, and out of the way of the ownership-class while they constantly "repair" society to their liking.

Yeah, but you didn't have to leave the house, which is worth a lot.
- Or talk to anyone!

There's lots of costs that don't show up in the 5$ value. Considering limited resources, the value in human lives tied with pollution, the pollution you are not generating during the two hours of hobbying...
I think the math checks out most of the time.

sometimes it's not about solving the immediate problem, but about making sure it doesn't happen again.
(literally "fixed" my alarm clock this week after it's plug broke off in the outlet by giving it a $10 right angle plug that won't be under any significant strain.)
- Sometimes it's about learning to fix things more than it is about fixing the thing.
  I regularly just take shit apart when it fails even if i have no intention of fixing it.

I see someone owns a 3d printer.

IMO, building your own devices/fixing is just plain more fun

I still have my CRT TV still open due I do not have the time to buy a 16v capacitor. Has been like, 2 weeks now. Wow. I need to fix it
- If you haven't yet, go order that cap. It'll take like 7 minutes tops.
  
  Finally!!! It's done.
  
  yea, fix that tv it's going to be the weekend's adventure

I fix stuff when it's harder than buying a new one just because it's rewarding. I guess the guy in the picture embodies that feeling but I don't picture it that way, it's just how I was brought up. Same reason I make meals instead of ordering doordash.

Nothing more satisfying than making something that cheaper, and also exceed the quality of buying ready-to-use product.
CAD, EDA, IDE, and correct toolkits to the rescue!
EDIT: In case someone want to delve in hobbyist/maker/diy world, here are some useful stuffs that available free:
3D CAD:
Freecad - FOSS 3D CAD software that available cross-platform.
Autodesk Fusion - Not so great alternative but servicable, Free plan have certain limitation.
EDA:
KiCAD - Designing electronic project has never been so easy. This one far superior than Autodesk Eagle crap.
EasyEDA - Free online and desktop EDA software that can be used for alternative.
(Microcontroller) IDE:
VSCode/Codium + PlatformIO - Most affordable, off-the-shelf controller are programmable with PlatformIO and enough for most average joe projects. Arduino IDE may be superior for newcomer but I recommend this as you have more leeway in which framework and board you can get out of single extension for Text Editor.
Toolkits:
Digital Multimeter - Most common electronics can be troubleshoot'd with digital multimeter to identify the problem.
Cheap E-Bay caliper (or any cheap caliper) - For most DIY project, cheap digital caliper are enough to measure dimension unless you really need 3 digit precision.
- I have difficulty finding that first project that would justify a purchase of a 3d printer.
  Even just sending something to a local 3d printshop is difficult.
  Basically I need a use case to kick me off.
  
  I have a 3d printer. Honestly, it's mostly junk that gets printed. I like the idea, but the utility isn't there. It's a solution in search of a problem.
  But I've made a few neat things. My own design for cabinet and drawer hardware and some custom knick knack souvenirs for a gig I work on each year to give to the crew.
  What I want is a large library of 3d model replacement parts for things like my car, but they haven't been made available so I'd have to model them myself and I'm not that good.
  
  Do you have pets? My first project will be cages for my electronics to keep my cats away from them, eventually I want to put together a hall tree. They're like coat hangers with a seat and storage for your shoes, but I'll also add a section for my work clothes
  
  To be honest I don't have 3d printer myself and rarely print to make a case, the electric bill really putting me off to own one. Most of time I used those pre-made abs plastic project box that you can cut/drill holes and come with various size. Other than that, sometime it feels "costly" to make something if you didn't plan ahead or not really going to use the project.
  
  Toy production, I have one - the main use is making whatever toys I think are cool. You want more LEGO - 3D print it. You want something to throw something for your dog, 3D print it.
  Admittedly those aren't use cases so much as hobbies. Occasionally you can 3D print a repair for a curtain hook or something. But everyone likes toys, even adults.
- For CAD I would recommend Onshape rather than Fusion, it's browser based so it works on Linux and I prefer it target than Fusion.
  The main limitation of the free tiers is that all the design you do are public.
- Also openSCAD if you struggle to get your head around normal CAD programs. Everything is written as a script and it's surprisingly intuitive.
- amazing and helpful comment. thank you

I just like fixin stuff. It's why I got a 3d printer and I'm learning CAD.
I would rather spend 8 hours banging my head against a wall than spend 10 dollars on Amazon to order a replacement part lol
- CAD work is more entertaining than video games to me, and in the end I'll have something I can use.
  
  I found an amazing website for Block Blast players: blockblastsolver.online It's an online tool that helps you find the best moves and strategies in the game. The free solver analyzes the game board and suggests optimal block placements to boost your scores. If you're into Block Blast and want to enhance your gameplay, this website is a must-try. It really makes the game more fun and challenging.
  
  I just discovered this amazing website emojimix.online It's an interactive platform where you can combine two emojis to create a new and unique one. As an emoji enthusiast, I'm having so much fun adding a fun twist to my digital communications. It's easy to use and there are endless possibilities. Whether you're on the web or using the mobile app, it's a great way to get creative with emojis. Highly recommend it!
  
  I just found this amazing website geometrydashjp.com It's a fan-made version of Geometry Dash. This game combines music and rhythm, and it's so exciting to control characters through levels full of rhythmic obstacles. If you love action platform games, you should definitely check it out!

I personally prefer to break a slightly broken device further

Everyone here fixing stuff with 3D printers while I am here struggling how to sew up wool silk leggings in a way that keeps them elastic and fighting for my life with darning

I mean it's not that crazy if it saves you a trip to whatever store.
Going to a single place to replace something can take an hour so we can subtract that. Getting paid $5 an hour for a fun activity is also an absolute steal.

I've gotten shit for taking apart the filter screen on my toilet's filler and cleaning out the sediment when I could just spend $20 to replace it. It's really not even that hard once you figure out the trick for spreading the clips holding it together. They really didn't want this to be user fixable.

have you heard of Solarpunk?
- I love how "solarpunk" is such a broad aesthetic that it encompasses both zero-waste high-tech hydrogen powered biocities as well as scrappy revolutionary village communities where people cook food on solar ovens made from shattered car mirrors and fashion antennas out of coat hangers. It can be both hi-tech or lo-tech, as long as the tech exists in harmony with humankind and with nature

Fighting the good fight! Also, time you enjoy "wasting" isn't wasted time.

It’ll be faster next time.

Absolutely! If it’s already broken, and you fail to fix it, what have you lost? Go for it (but pls do your research and be careful. Don’t go poking about inside appliances with big capacitors, for example, like microwave ovens).

As a person is not very handy around the house, I can't tell you how good I feel about myself when I can actually fix something. It's better than sex.

I personally designed and 3D printed a case to hold 4 rechargeable batteries, so I could charge them with 5 Volts from a USB cable, instead of buying a new charger.
Fun Fact: this ruins the batteries. Gave up on designing myself and downloaded a design for a battery-adapter (plastic shell + 1 screw that makes small battery fit in big devices). My stockpile of small batteries then lasted me 2 months before I finally bought a charger and new rechargeables.

Idk, repairing is often fun and may be faster actually. As in you don't need to spend time searching for a suitable product and waiting for it to be delivered. Also, most breaks are more or less trivial to fix, so it's at least worth a try, imo.

We salute you

Can you fix my boiler?

I just like fixin stuff. It's why I got a 3d printer and I'm learning CAD.
I would rather spend 8 hours banging my head against a wall than spend 10 dollars on Amazon to order a replacement part lol