I'm looking for an alternative Youtube front-end for Linux Desktop but FreeTube for example doesn't support resolutions higher than 1080p. Is there an easy to use client, that supports 1440p and higher out-of-the-box?

Is there a way to easily create Gotify notifications from critical system errors (journalctl -p 3)? I recently had a bunch of out-of-memory errors and it would've been great to be notified about them. There must be a pre-build solution for this, right? Ideally also dockerized. Thanks in advance!

Does anybody know whether there is a WebGUI/Docker for Deezloader?

I'm looking for a simply solution to monitor all my servers and systems using a single dashboard. I want to see metrics like CPU usage, used RAM and storage to see if something is wrong. I just set up Node-Exporter, Prometheus and Grafana but haven't found an existing dashboard that shows multiple hosts at once. Now I looked into Checkmk and Zabbix but I feel like both are a little overpowered for what I'm looking for. Do you have any recommendations?

I made a simple script and timer for a friend to automatically switch between light and dark theme on Plasma. In case anybody needs this.

I created this small script and thought it might be useful to someone else. Any feedback is welcome!

I set up Headscale and Tailscale using Docker on a VPS, which I want to use as my public IPv4 and Reverse Proxy to route incoming traffic to my local network and e. g. my home server. I also set up Tailscale using Docker on my home server and connected both to my Headscale server. I am able to ping on Tailscale container from the other and vice versa and set up --advertise-routes=192.168.178.0/24 on my home server as well as --accept-routes on my VPS, but I can't ping local IP addresses from my VPS. What am I missing? Both container are connected to the host network, I have opened UDP ports 41641 and 3478 on my VPS.

I'm looking for an easy way to upload files from my Android smartphone to my home server. is there a - ideally dockerized - solution for that? Some simple web GUI where I can click on "Upload" and the files will be saved to a certain directory on my home server?

EDIT: I should've added that I want to do this remotely and not in my local network. I want to be able to send files from my Android smartphone from anywhere via the internet to my home server. That's why I thought about a services hosted on my server, which frontend I could access through my smartphone. But I might've answered my question already with the following: https://github.com/zer0tonin/Mikochi

EDIT #2: Thanks guys, I ended up creating my own Docker container running nextcloudcmd inspired by this: https://github.com/juanitomint/nextcloud-client-docker But I built the container from scratch and it's very minimalistic. I can publish it on my Gitlab when it's somewhat ready. Here's a little preview.

Dockerfile FROM alpine:latest RUN apk update && apk add nextcloud-client COPY nc.sh . RUN chmod +x ./nc.sh VOLUME /data CMD ./nc.sh

nc. sh (How can I prevent automatic hyperlinking?) #!/bin/sh while true do nextcloudcmd /data https://${username}:${passwort}@${nextcloud-domain} sleep 300 done

I followed this tutorial to create local certificates for my home server, but now it failed to renew automatically and I have no clue waht to do. Can anybody assist me in debugging, please? https://notthebe.ee/blog/easy-ssl-in-homelab-dns01/

I'm using duckdns.org, added mydomain.duckdns.org and the local IP of my home server. In Nginx-Proxy-Manager I have created the respective wildcard certificate. The log of my NPM container reports the following:

[3/10/2024] [1:55:50 PM] [SSL ] › ℹ info Renewing Let'sEncrypt certificates via DuckDNS for Cert #6: *.mydomain.duckdns.org, mydomain.duckdns.org [3/10/2024] [1:55:50 PM] [SSL ] › ℹ info Command: certbot renew --force-renewal --config "/etc/letsencrypt.ini" --work-dir "/tmp/letsencrypt-lib" --logs-dir "/tmp/letsencrypt-log" --cert-name "npm-6" --disable-hook-validation --no-random-sleep-on-renew [3/10/2024] [1:55:50 PM] [Global ] › ⬤ debug CMD: certbot renew --force-renewal --config "/etc/letsencrypt.ini" --work-dir "/tmp/letsencrypt-lib" --logs-dir "/tmp/letsencrypt-log" --cert-name "npm-6" --disable-hook-validation --no-random-sleep-on-renew [3/10/2024] [1:55:53 PM] [Express ] › ⚠ warning Saving debug log to /tmp/letsencrypt-log/letsencrypt.log Failed to renew certificate npm-6 with error: The DNS response does not contain an answer to the question: mydomain.duckdns.org. IN TXT All renewals failed. The following certificates could not be renewed: /etc/letsencrypt/live/npm-6/fullchain.pem (failure) 1 renew failure(s), 0 parse failure(s)

!

I noticed my home servers SSD running out of space and it ended up being my Jellyfin Docker container which wasn't clearing the directory for transcodes in /var/lib/jellyfin/transcodes correctly.

I simply created a new directory on my media hard drive and bind mounted the above mentioned directory to it. Now Jellyfin got over 1 TB of free space to theoretically clutter. To prevent this I simply created a cronjob to delete old files in case Jellyfin isn't.

@daily /usr/bin/find /path/to/transcodes -mtime +1 -delete

Easy!

I got a bunch of self-hosted stuff and use a VPS that has a public IPv4 to access my services because my home network has only DS-Lite. My home server ist connected to the VPS using Wireguard. Now I want to connect my Smartphone to my VPN to be able to access some local services remotely. I'm able to add a second peer to the Wireguard config on the VPS, but I'm struggeling to configure the AllowedIPs correctly. The VPS apparently needs AllowedIPs 10.0.0.0/24 and 192.168.178.0/24, but the Smartphone as well for both to redirect request into my home network. But it's not possible to configure the same IP ranges for two peers. What do I do?

EDIT: Solved: https://iliasa.eu/wireguard-how-to-access-a-peers-local-network/

I'm running Jellyfin in Docker in my home server for movies and shows. I recently added a music directory and apparently after that I'm getting almost hourly notifications from my Uptime-Kuma instance connected to Gotify that Jellyfin is down with status code 502. It's quickly up again, but I'm wondering what's causing this. I have Nginx Proxy Manager configured for a local and a public domain pointing to my Jellyfin instance. Any idea what could be causing this?

!

I just discovered the Sota Remix of Bring Me The Horizon's "Can You Feel My Heart" and feel like I've heard it in someone's set, but I don't know who's. I listened to a lot of Nitepunk, Imanu, Buunshin, DJ Ride, Gladde Paaling and Luude lately. Maybe someone recognizes it. Here's the track: https://www.youtube.com/watch?v=6SRzEgCY0Xs

I have an Intel Core i5-7600K and just passed through my Intel HD 630 iGPU from my Proxmox host to a virtual machine running Debian to be able to use it in a Jellyfin Docker container. Everything worked fine, but I used only the basic configuration that I found which I don't really get. Can someone explain to me whether I'm missing something?

First I followed this tutorial: https://3os.org/infrastructure/proxmox/gpu-passthrough/igpu-passthrough-to-vm/ But I only added intel_iommu=on iommu=pt to my boot parameters and vfio, vfio_iommu_type1, vfio_pci, vfio_virqfd to /etc/modules.

But what are all the other parameters good for? pcie_acs_override=downstream,multifunction initcall_blacklist=sysfb_init video=simplefb:off video=vesafb:off video=efifb:off video=vesa:off disable_vga=1 vfio_iommu_type1.allow_unsafe_interrupts=1 kvm.ignore_msrs=1 modprobe.blacklist=radeon,nouveau,nvidia,nvidiafb,nvidia-gpu,snd_hda_intel,snd_hda_codec_hdmi,i915"

Then I added the iGPU as a PCIe device to my VM using the Proxmox webUI and added the render device /dev/dri/renderD128 to the Jellyfin Docker container. I followed the official instructions from Jellyfin: https://jellyfin.org/docs/general/administration/hardware-acceleration/intel/#configure-with-linux-virtualization

But I haven't added the host group ID, what is that good for? And I also installed the intel-media-va-driver, i965-va-driver and firmware-linux-nonfree as well as firmware-misc-nonfree. Are all of those necessary? And then I had to add options i915 enable_guc=2 to /etc/modprobe.d/i915.conf to get it to work. This is supposedly only necessary for Low-Power Encoding, but it was necessary to get hardware transcoding to work at all?

I'm happy that it is working now, but I don't really feel like I fully understood what I did. Were some steps unnecessary or did I miss anything?

I followed this guide: https://notthebe.ee/blog/easy-ssl-in-homelab-dns01/

But my Nginx Proxy Manager is running on a VPS that is connected to my local network through a WireGuard tunnel. Could that be an issue? I don't know why it's not working?

My NPM is also accessible to the local IP of my homeserver on which WireGuard is running.

I want to start Konsole in Split View which is possible using the --layout command but then also run a command like htop in one of the sessions. How do I do that?