That looks really awesome. Would be interesting to know the performance impact of this in comparison to the traditional approach and whether that impact makes it worth it to use it in any type of game or just in games where the ocean is a central part.
Parties in the "middle" have always done right wing politics. There is no political center, those are just right wingers that don't want to admit it or feel superior because they "listen to both sides".
That was a joke, whether or not your phone screen cracks it obviously not a skill issue
Skill issue on their part
I use my phone without a case too, phones don't break that easily. I even dropped it on stone tiles once when I missed my pocket and it only got a few scratches on the side from that.
Using the iGPU might save power but the resolution doesn't need to be turned down for that
If you go to about:profiles, I'm pretty sure there's a button to open the profile folder. Move all the files and folders from the Firefox profile folder to the Librewolf profile folder and you should have your settings and (I think) extensions in Librewolf now. Not sure about passwords but someone here in the replies said you can just import your Firefox passwords into Bitwarden. Since you want to switch to Bitwarden anyway, you should do that. Saving passwords in the browser isn't very secure anyway.
I might install it again too, I haven't played since the second week or so after it released. I currently have my hands full with Satisfactory tho.
Any advantage to using Orca Slicer over PrusaSlicer? Basically the main reason I use PrusaSlicer is just cus it's on flathub
I have a Sovol SV06, which normally uses an SD Card but I flashed Klipper on it and connected a Rasperry Pi to it (which is connected to my network via ethernet) and now I also have a web interface and can just upload the files and start the print from there.
Since it's using the Raspberry Pi instead of the built-in microcontroller for all the calculations, it's also a lot more accurate.
I just use Blender. Any advantage to using FreeCAD?
I really enjoyed it the first one or two weeks but after I basically finished all the content it was just a grind for primogens and I stopped playing 😕
It's nice of you to add alt text for the image in the description but isn't there an ActivityPub standard for that? Mastodon has, would be nice if Lemmy had it too.
There's a weird issue with VR on Linux where it doesn't use the right GPU profile for some reason. A pretty easy workaround for that is to use CoreCTRL to manually set the GPU profile to high.
It should just work. You install SteamVR through Steam, start it and it should detect the headset.
Here are a few ideas on what could have gone wrong:
- Steam is installed as a flatpak
- Doesn't work out of the box but I think it's also in this thread where I asked how to make that work
- You use GNOME
- Currently, VR works on KDE in X11 and Wayland but in GNOME only in X11. GNOME 47 (The next update, some people might already have it depending on the distro) adds support for VR in Wayland tho
These are the 2 things I could think of off the the top of my head. If you know what exactly didn't work I might be able to help you.
Edit: Forgot to add, you also need to install CoreCTRL and use it to set the GPU to high, otherwise performance is gonna be shit.
Weird is an understatement. Isn't it fair to say at this point that he's probably a child molester? I mean, there were tons of photos with him and epstein, he wanted to release all the secret government documents except for the epstein files, there's tons of photos with and p diddy and he's made really weird comments about his daughter. Seems like he's an official guest of the diddy party.
Whaaaaat...? In a time of economic struggles, companies would rather support fascists than risk letting socialism take over? This certainly never happened before, especially not in Germany.
That's my new character. He's just a chill guy who low key doesn't give af.
cross-posted from: https://discuss.tchncs.de/post/21001865
> I just installed Piped using podman-compose but when open up the frontend in my browser, the trending page is just showing the loading icon. The logs aren't really helping, the only error is in piped-backend:
>
> > java.net.SocketTimeoutException: timeout > at okhttp3.internal.http2.Http2Stream$StreamTimeout.newTimeoutException(Http2Stream.kt:675) > at okhttp3.internal.http2.Http2Stream$StreamTimeout.exitAndThrowIfTimedOut(Http2Stream.kt:684) > at okhttp3.internal.http2.Http2Stream.takeHeaders(Http2Stream.kt:143) > at okhttp3.internal.http2.Http2ExchangeCodec.readResponseHeaders(Http2ExchangeCodec.kt:97) > at okhttp3.internal.connection.Exchange.readResponseHeaders(Exchange.kt:110) > at okhttp3.internal.http.CallServerInterceptor.intercept(CallServerInterceptor.kt:93) > at okhttp3.internal.http.RealInterceptorChain.proceed(RealInterceptorChain.kt:109) > at okhttp3.internal.connection.ConnectInterceptor.intercept(ConnectInterceptor.kt:34) > at okhttp3.internal.http.RealInterceptorChain.proceed(RealInterceptorChain.kt:109) > at okhttp3.internal.cache.CacheInterceptor.intercept(CacheInterceptor.kt:95) > at okhttp3.internal.http.RealInterceptorChain.proceed(RealInterceptorChain.kt:109) > at okhttp3.internal.http.BridgeInterceptor.intercept(BridgeInterceptor.kt:83) > at okhttp3.internal.http.RealInterceptorChain.proceed(RealInterceptorChain.kt:109) > at okhttp3.internal.http.RetryAndFollowUpInterceptor.intercept(RetryAndFollowUpInterceptor.kt:76) > at okhttp3.internal.http.RealInterceptorChain.proceed(RealInterceptorChain.kt:109) > at okhttp3.internal.connection.RealCall.getResponseWithInterceptorChain$okhttp(RealCall.kt:201) > at okhttp3.internal.connection.RealCall.execute(RealCall.kt:154) > at me.kavin.piped.utils.RequestUtils.getJsonNode(RequestUtils.java:34) > at me.kavin.piped.utils.matrix.SyncRunner.run(SyncRunner.java:97) > at java.base/java.lang.VirtualThread.run(VirtualThread.java:329) >
>
> Would appreciate it if anyone could help me. I also wasn't sure what info to include, so please ask if there's any more info you need.
I just installed Piped using podman-compose but when I open up the frontend in my browser, the trending page is just showing the loading icon. The logs aren't really helping, the only error is in piped-backend:
java.net.SocketTimeoutException: timeout at okhttp3.internal.http2.Http2Stream$StreamTimeout.newTimeoutException(Http2Stream.kt:675) at okhttp3.internal.http2.Http2Stream$StreamTimeout.exitAndThrowIfTimedOut(Http2Stream.kt:684) at okhttp3.internal.http2.Http2Stream.takeHeaders(Http2Stream.kt:143) at okhttp3.internal.http2.Http2ExchangeCodec.readResponseHeaders(Http2ExchangeCodec.kt:97) at okhttp3.internal.connection.Exchange.readResponseHeaders(Exchange.kt:110) at okhttp3.internal.http.CallServerInterceptor.intercept(CallServerInterceptor.kt:93) at okhttp3.internal.http.RealInterceptorChain.proceed(RealInterceptorChain.kt:109) at okhttp3.internal.connection.ConnectInterceptor.intercept(ConnectInterceptor.kt:34) at okhttp3.internal.http.RealInterceptorChain.proceed(RealInterceptorChain.kt:109) at okhttp3.internal.cache.CacheInterceptor.intercept(CacheInterceptor.kt:95) at okhttp3.internal.http.RealInterceptorChain.proceed(RealInterceptorChain.kt:109) at okhttp3.internal.http.BridgeInterceptor.intercept(BridgeInterceptor.kt:83) at okhttp3.internal.http.RealInterceptorChain.proceed(RealInterceptorChain.kt:109) at okhttp3.internal.http.RetryAndFollowUpInterceptor.intercept(RetryAndFollowUpInterceptor.kt:76) at okhttp3.internal.http.RealInterceptorChain.proceed(RealInterceptorChain.kt:109) at okhttp3.internal.connection.RealCall.getResponseWithInterceptorChain$okhttp(RealCall.kt:201) at okhttp3.internal.connection.RealCall.execute(RealCall.kt:154) at me.kavin.piped.utils.RequestUtils.getJsonNode(RequestUtils.java:34) at me.kavin.piped.utils.matrix.SyncRunner.run(SyncRunner.java:97) at java.base/java.lang.VirtualThread.run(VirtualThread.java:329)
Would appreciate it if anyone could help me. I also wasn't sure what info to include, so please ask if there's any more info you need.
cross-posted from: https://discuss.tchncs.de/post/20956700 >All the public Piped instances are getting blocked by YouTube but do small selfhosted instances, that are only used by a handful of users or just yourself, still working? Thinking of just selfhosting it. > > On a side note, if I do it, I'd also like to install the new EFY redesign or is that branch too far behind?
All the public Piped instances are getting blocked by YouTube but do small selfhosted instances, that are only used by a handful of users or just yourself, still working? Thinking of just selfhosting it.
On a side note, if I do it, I'd also like to install the new EFY redesign or is that branch too far behind?
Edit: As you can see in the replies, private instances still work. I also found the instructions for running the new EFY redesign here
You need to hold down fn1 + page up for a few seconds until the keyboard flashes red, then let go of the keys. Now you can use page up as the print screen key. If you hold down fn1 + page up for a few seconds again, it will go back to working as the page up key.
Just had to search this up and found out how to do this from a Reddit post, so I thought I'd put this information on here as well.
I would really appreciate it if someone could help me with this. I'm having an issue with my Sovol SV06, which is that I get a lot of stringing. I'm still fairly new to 3D printing, so I have no idea what could cause this and how I could go about fixing this. I already searched for this issue online btw but didn't really find anything helpful.
The only change I made to this printer is that I hooked up a Raspberry Pi 4 to it and installed Klipper and Octoprint. I'm also using PrusaSlicer with the config from here.
Edit: Forgot to mention I was using PLA for this print
I'm trying to extract the frames of a video as individual images but it's really slow, except when I'm using jpeg. The obvious issue with jpegs is the data loss from the compression, I want the images to be lossless. Extracting them as jpegs manages about 50-70 fps but as pngs it's only 4 fps and it seems to continue getting slower, after 1 minute of the 11 minute video it's only 3.5 fps.
I suspect it's because I'm doing this on an external 5tb hard drive, connected over USB 3.0 and the write speed can't keep up. So my idea was to use a different image format. I tried lossless jpeg xl and lossless webp but both of them are even slower, only managing to extract at about 0.5 fps or something. I have no idea why that's so slow, the files are a lot smaller than png, so it can't be because of the write speed.
I would appreciate it if anyone could help me with this.
I installed a GRUB theme and changed some options in the config but now I need to run update-grub (alias for grub2-mkconfig -o /etc/grub2-efi.cfg) after every kernel update or else that new kernel version won't boot. Does anybody know a fix for this?
I recently found out that instead of just using online sources, you can also use something you can host yourself, like Komga, in Mihon. I'm just wondering if there's an advantage to it that I didn't think of because the only things I can think of are:
- Progress is synced over multiple devices
- Online sources can suddenly go offline, your self-hosted service won't
cross-posted from: https://discuss.tchncs.de/post/13071059
> And there's global free leech while signups are open
I have a Nothing Phone 1 but unfortunately, no one's currently maintaining it. I was thinking of doing it myself but I don't really know where to start. Would be great if you could give me some pointers.
