Remote View
soldering SMT diode is really fast
soldering SMT diode is really fast
No need to bend the legs, no need to do wire stripping. I did this in 30 minutes casually... I guess the full halve will take around 1 hour
15 comments
-
What’s your approach to stripping the enamel from the wire?
-
a soldering iron at 360 degree celcius
-
Do you score it first or something?
-
-
-
Minimelf <3
-
The only case I’ve ever seen where they make sense!
-
-
Is that using magnet wire to run the matrix? That small of guage seems like it will potentially break with some shock force (dropping a keyboard from a few centimeters on a wooden desk or something). Or is there a backplate supporting it?
-
yeah, they are quite delicate. I wanted to use thicker ones but it is hard to get thick magnet wires. I never tried dropping them so idk, I guess making them less tensioned would help a bit
-
It one does look thin. The smallest I’d go is 28awg.
-
-
Good to know, it looks very clean!
The diodes seem to be flying!
Practically, I guess assume you hold the diode to the pin, solder it, bring the wire to the diode and solder it. How do you hold the diode, the iron and the solder at the same time?
-
My guess is you pre tin the switch pin, get a blob of solder on your iron and have the diode in tweezers at the ready then put it all together. It only needs a small bead of solder (and flux).
-
15 comments